High Accuracy Pressure Sensor LFT1050

 The high pressure sensor additionally optimizes a temperature compensation circuit and a signal processing circuit, so this product has an accuracy of 0.1% in the range of 0-70bar at general temperature rang. At present, this product uses a ceramic core with a lower cost. If the customer has a higher-precision customization requirement, we can also replace the core with a higher-precision.

 

Specification

 

Specification of high precision pressure sensor LFT1050

Precision	The pressure output accuracy at room temperature maintains  ±0.25%FS. 0~70 bar
Compensation temperature	0~60℃
storage temperature	-40~100℃
Power supply voltage adaptability	The product is powered by a stabilized power supply, the positive and negative poles of the power supply are reversely connected, the maximum supply voltage is maintained for 1 minute, and the test after the product output is normal
overload	1.5 times the maximum range
Vibration	Sweep frequency test, vertical + horizontal;
	Vibration frequency: 10~60Hz;
	Low frequency intensity 35, high frequency intensity 60;
	Slope 1.0, acceleration 20;
	10 cycles of 5 minutes each
Group pulse interference	1000V, 5KHz, 30s
Static interference	8000V electrostatic contact discharge
Insulation resistance	When the ambient temperature is 15°C~35°C and the relative humidity is 45%~75%, each set of terminals of the transmitter (including the housing) The insulation resistance between is not less than 100MΩ
Dielectric strength	The power port and the shell can withstand 500V AC/50Hz/1min without arcing or breakdown.

 

 

Types of connections

 

How to SelectCode and description NotesT1050ModelRange-100～0～100Kpa/0～2...600bar/0-60MPaMeasurement Range A4A4 = 4~20mA（Two-wired）Output ModeV05V05 = 0.5~4.5V（Three-wired）V0V0 = 0~5V（Three-wired）V10V10 = 0~10V（Three-wired）KK = kpaPP = psiUnitMM = MpaBB = bar 0.50.5 = 0.5％F.SAccuracy class1.01.0 = 1.0％F.S PP = Packard（Parker plug）Electrical connectionDD = DIN43650C（Little Hirschmann）D1D1 = DIN43650A（Big Hirschmann）MM = M12（M12 Waterproof outlet）CC = Cable（Three core aviation connector） GG = G1/4G2G2 = G1/2Pressure connectionNN = NPT1/4M20M = M20*1.5RR = R1/4UU = 7/16-20UNF External thread  BB = BSP1/4 1.01.0 = 1mCable length2.02.0 = 2m3.03.0 = 3m T1050      0-60      V05       B      1.0          M     G         1.0   Model selection example 

 

Dimensions

 

Features

 

Features of High Accuracy electronic pressure sensor Transducer

Scale: 0~70 bar

Accuracy:  0.25%FS

Temperature compensation and accuracy calibration

Robust 304/306 steel housing  

Silicon Wafer imported from Germany

 

Application

 

Application of High Exactness gauge pressure sensor

Pressure measuring of water, oil, fluid, and gas require relatively exact monitoring value and repeatable measurements.

 

More Related Products